dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com e-1 e-mail: sales@glenair.com series 79 micro-crimp section e: panel mount connectors, crimp termination a a b b c c d d e e f f g g h h index index panel mount p anel recept acles with pin cont acts, crimp termina tion, 790-026p how t o order sample part number 790-026p l-6p6 mt g part number shell size - insert arr. shell finish hardware option 790-026p rear panel mounted receptacle with pin contacts see table 1 for available insert arrangements to order a connector without size #16 or #12 power pins, substitute w instead of p in the insert arrangement. example: 36p2 is supplied with 2 power pins. 36w2 is supplied less the power pins. see section b for coaxial contacts purchased separately. m electroless nickel general purpose applications mt nickel-ptfe 1000 hour grey? maximum corrosion protection and durability (non-refective grey) znu zinc-nickel with black chromate tactical applications (non-refective black) additional shell fnishes are listed on page c-9. n no hardware p female jackpost g guide pin s female guide socket m aterials and finishes shell aluminum alloy contacts copper alloy, 50 microinches g old plated insulators liquid crystal polymer (lcp) retention clips beryllium copper alloy interfacial seal, grommet flourosilicone rubber hardware 300 series stainless steel panel gasket fluorosilicone, conductive 790-026p connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. these connectors feature machined aluminum shells, fuorosilicone face seals and wire grommets for environmental protection. contacts are rear-release snap-in crimp type. connectors are supplied with crimp contacts packaged separately. size #23 signal pins accept up to #22 awg wire. size #16 contacts accept #16-18 awg wire. size #12 contacts accept #12-14 awg wire. size 12 and 16 cavities also accept coaxial contacts purchased separately. attach optional shielding adapters (799-016) for emi protection. s pecifications current rating #23 5 amps, #16 13 a., #12 23 a. dielectric withstanding voltage #23 500 vac rms, #12 and #16 1800 vac rms insulation resistance 5000 megohms minimum operating temperature -65 c. to +150 c. shock 300 g. vibration 37 g. rev. 01-aug-2008
dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com e-2 e-mail: sales@glenair.com panel mount series 79 micro-crimp section e: panel mount connectors, crimp termination a a b b c c d d e e f f g g h h index index a a b b c c d d e e f f g g h h index index .007 (0.18) front insulator retaining clip rear insulator grommet potting .195 (4.95) emi gasket .025 (0.64) wire (ref.) pin contact shell guide pin interfacial seal table 1 contact arrangements layout contact quantity face view #23 #16 #12 a-5 5 b-2p2 2 b-9 9 c-13 13 d-15 15 d-3p3 3 d-7p2 5 2 e-11p2 9 2 e-19 19 e-7p3 4 3 f-15p2 13 2 f-23 23 f-5p5 5 g-33 33 h-10p4 6 4 h-29p7 22 7 h-36p2 34 2 h-54p2 52 2 h-5p5 5 h-66 66 j-17p4 13 4 j-25p2 23 2 j-33 33 j-7p7 7 k-27p4 23 4 k-35p2 33 2 k-43 43 k-9p9 9 l-6p6 6 cross-sectional view of 790-026p t able 2 h ardware option n no mating hardware connector is supplied with threaded holes. shell sizes h and l have #6-32 threads, other sizes have #4-40 threads. thread depth is .150" (3.8). p jackposts connector is supplied with non-removable stainless steel jackposts. shell sizes h and l have #4-40 unc thread, other sizes have #2-56 thread. stainless steel. g guide pins connector is supplied with stainless steel non- removable guide pins. mates with type "s" guide sockets on corresponding plug connector. s guide sockets connector is supplied with stainless steel non- removable bushings. mates with type "g" guide pins on corresponding plug connector. rev. 01-aug-2008
a a b b c c d d e e f f g g h h index index dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com e-3 e-mail: sales@glenair.com series 79 micro-crimp section e: panel mount connectors, crimp termination a a b b c c d d e e f f g g h h index index panel mount 790-026p shell size a,b,c,d,e,f ,j,k dimensions blind mate b basic a max c basic c basic d max .485 (12.32) max .335 (8.51) max .640 (16.26) max e max .308 (7.82) max 2-56 unc-2b x .150 (3.81) min 2 places .170 (4.32) .093 .005 (2.36 0.13) 2-56 unc-2b x .150 (3.81) min 2 places .215 (5.46) max jackpost shown for reference. see ordering information for other options. shell sizes a, b, c, d, e, f, g, j, k +/- .030 (0.76) allowable misalignment from centerline 790-026p dimensions for size a-f, j and k shell size a max. b basic c basic d max. e max. in. mm. in. mm. in. mm. in. mm. in. mm. a 1.211 30.76 .925 23.50 .565 14.35 .401 10.19 .760 19.30 b 1.361 34.57 1.075 27.31 .715 18.16 .551 14.00 .910 21.11 c 1.511 38.38 1.225 31.12 .865 21.97 .701 17.81 1.060 26.92 d 1.611 40.92 1.325 33.66 .965 24.51 .801 20.35 1.160 29.46 e 1.761 44.73 1.475 37.47 1.115 28.32 .951 24.16 1.310 33.27 f 1.911 48.54 1.625 41.28 1.265 32.13 1.101 27.96 1.460 37.08 j 2.261 57.43 1.975 50.17 1.615 41.02 1.456 36.98 1.810 45.97 k 2.661 67.59 2.375 60.33 2.015 51.18 1.860 47.24 2.210 56.13 rev. 01-aug-2008
dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com e-4 e-mail: sales@glenair.com panel mount series 79 micro-crimp section e: panel mount connectors, crimp termination a a b b c c d d e e f f g g h h index index a a b b c c d d e e f f g g h h index index blind mate 790-026p shell size g dimensions 1.575 (40.01) basic 1.861 (47.27) max 1.215 (30.86) basic 1.215 (30.86) basic 1.079 (27.41) max .215 (5.46) max .335 (8.51) max 1.410 (35.81) max .387 (9.83) max 2-56 unc-2b x .150 (3.81) min 2 places jackpost shown for reference. see ordering information for other options. .170 (4.32) .093 .005 (2.36 0.13) .640 (16.26) max 2-56 unc-2b x .150 (3.81) min 2 places .575 (14.61) max shell sizes a, b, c, d, e, f, g, j, k +/- .030 (0.76) allowable misalignment from centerline rev. 01-aug-2008
a a b b c c d d e e f f g g h h index index dimensions in inches (millimeters) and are subject to change without notice. ? 2008 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com e-5 e-mail: sales@glenair.com series 79 micro-crimp section e: panel mount connectors, crimp termination a a b b c c d d e e f f g g h h index index panel mount .600 (15.24) max .093 .005 (2.36 0.13) .170 (4.32) k max . 385 (9.78) max .640 (16.26) max .410 (10.41) max 4-40 unc-2b x .150 (3.81) min 2 places 4-40 unc-2b x .150 (3.81) min 2 places h basic .265 (6.73) max g basic f max h basic j max jackpost shown for reference. see ordering information for other options. blind mate shell sizes h, l +/- .040 (1.02) allowable misalignment from centerline 790-026p shell size h and l dimensions 790-026p s ize h & l dimensions shell size f max. g basic h basic j max. k max. in. mm. in. mm. in. mm. in. mm. in. mm. h 2.500 63.50 2.236 56.79 1.800 45.72 1.450 36.83 2.045 51.94 l 2.736 69.49 2.472 62.79 2.036 51.71 1.686 42.82 2.281 57.94 rev. 01-aug-2008
|
